Sizing & Fit Guide

Getting accurate measurements is the most important step in finding the right fit. Please take your time and follow these instructions carefully.

For In-Stock Boots

Most customers can order in-stock boots using two measurements:

1. Foot Length
2. Ball of Foot Measurement

These measurements will help determine your recommended size and width.

What You'll Need

• A blank sheet of paper
• A thin pen or pencil
• A cloth measuring tape
• The socks you normally wear with boots
• A helper

Do not measure yourself. A helper is strongly recommended for the most accurate results.

Step 1: Measure Foot Length

Before You Start

• Put on the socks you normally wear with boots.
• Sit in a chair with both feet flat on the floor.
• Place a sheet of paper under one foot.

Take the Measurement

1. Have your helper mark the tip of your longest toe.
2. Have your helper mark the very back of your heel.
3. Remove your foot from the paper.
4. Measure the distance between the two marks.
5. Write down the measurement.
6. Repeat for the other foot.

Use the longer of the two measurements when selecting your size.

Step 2: Measure Ball of Foot Circumference

The ball of your foot is the widest part of your foot, just behind your toes.

Take the Measurement

1. Sit with your foot flat on the floor.
2. Wrap the cloth tape around the widest part of your foot.
3. The tape should pass:
   • Across the big toe joint
   • Around the outside of the foot behind the pinky toe joint
4. Pull the tape snug, but not tight.
5. Record the measurement.
6. Repeat for the other foot.

Use the larger of the two measurements when selecting your width.

Step 3: Find Your Size

Select your:

• Foot Length
• Ball of Foot Measurement

Our sizing tool will recommend a size and width based on your measurements.

Please note that sizing can vary slightly between different lasts and boot models.